Valve Station DFCV
The Valve Station DFCV Series can be used in liquid supply, gas supply, liquid discharge, return air and other pipelines. Various modules are combined to form the required functions. Modular centralized installation greatly reduces the number of welding points in the pipeline and reduces leakage risk, it is recommended to install in a closed piping system, the side interface can be connected to pressure gauges, sight glasses, sensors.
Applicable Medium: Ammonia, Fluorine and other refrigerants.
Product Information
Technical Parameter
Nominal Diameter: DN15, DN20, DN25
Nominal Pressure: 4.0MPa
Applicable Temperature: -50 ℃ ~ + 150 ℃
Applicable Medium: Ammonia, Fluorine and other refrigerants.
Module Combination: 4 groups, 6 groups
Common Configuration Schemes | |||||||
Application Pipeline | P1 | P2 | P3 | P4 | P5 | P6 | Code |
Fluid Supply | Manual Stop Valve | Filter | Solenoid Valve | Stop Check Valve | 01 | ||
Fluid Supply | Manual Stop Valve | Filter | Solenoid Valve | Manual Open Setting | Regulating Valve | Manual Stop Valve | 02 |
Fluid Supply | Manual Stop Valve | Filter | Solenoid Valve | Manual Open Setting | Check Valve | Manual Stop Valve | 03 |
High-pressure Liquid Supply | Manual Stop Valve | Filter | Electric Stop Valve | Manual Stop Valve | 04 | ||
Hot Air Defrosting | Manual Stop Valve | Filter | Solenoid Valve | Manual Stop Valve | 05 | ||
Hot Air Defrost | Manual Stop Valve | Filter | Solenoid Valve | Manual Stop Valve | Regulating Valve | Manual Stop Valve | 06 |
Inhalation Adjustment | Manual Stop Valve | Filter | Regulating Valve | Manual Stop Valve | 07 | ||
Back Air Regulation | Manual Stop Valve | Filter | Regulating Valve | Manual Stop Valve | 08 | ||
Pressure Relief Regulation | Manual Stop Valve | Filter | Regulating Valve | Stop Check Valve | 09 |
Valve Station modules P1 and P2 are Stop valves and Filter.
For 4-module Valve Station, P3 are Solenoid Valve,Electric Valve and Throttle valves and other functional valves.
For 6-module Valve Station P3 is Solenoid Valve,P4 is Manual Opening Devices,P5 is Regulating Valves, Electric Valve and other functional valves, P6 is Stop Valve or Check Valve.
Specific configurations are combined according to needs, and common function combinations are shown in the configuration table.